Video&Audio Camera&Photo DVD Movies
Zenith ZDS-5004 Satellite Diplexer home electronics.
Home » Home Electronics » Boutique » Zenith » Television/HDTV » TV Accessories

Television/HDTV • Under 31 Inches
Television/HDTV • Flat Panel TVs
Television/HDTV • Over 32 Inches
Television/HDTV • Plasma TVs
Television/HDTV • TV DVD VCR Combinations
Television/HDTV • Console TVs
Television/HDTV • HDTVs
Television/HDTV • LCD TVs

Zenith ZDS-5004 Satellite Diplexer
buy bestselling audio, video, electronic equipment find reviews, ratings, prices
Zenith ZDS-5004 Satellite Diplexer List Price: $12.95


Features
 Signal diplexer for combining surveillance camera, off-air, or cable TV signals into single cable
 Focuses all 3 feeds onto single wire that connects satellite TV receiver with outside dish
 Combination of signals doesn't adversely affect satellite TV reception
 Recommended for use with 2.3 MHz quad shield RG6 coaxial cable
 Saves hours of installation time and cable length; works indoors and outdoors
[ + Zoom ]   [ Buy Now ] Electronics : This item is currently not available.
Zenith ZDS-5004 Satellite Diplexer description
If you're already a satellite TV subscriber and you need to run a new cable through the walls for an additional cable connection, surveillance camera or other source, the Zenith ZDS-5004 Satellite Diplexer can save you a lot of time. The ZDS-5004 can send off-air television signals, cable TV or surveillance camera feeds to your TV using the same cable that already connects your satellite receiver to the dish -- without adversely impacting your satellite TV reception. In other words, this diplexer allows you to use two antennas over the same cable, keeping you from having to bring yet another cable into you house.

Simply connect your surveillance camera, off-air antenna or incoming cable to one of the diplexer inputs, connect the other to your satellite dish, and it will combine the two signals onto the same cable. Then connect another diplexer at the receiving end (that is, at your television), and the signal will be split again, without any loss of signal strength. Using this diplexer instead of running new cable into your home will save you hours of installation time.

Zenith ZDS-5004 Satellite Diplexer Customer Reviews
  1     2  
♥♥♥♥♥ Zenith ZDS-5005 Satellite Diplexer
I needed to use one cable for Direct TV Satellite and send a signal to my wifes Television in her work room so she could view Satellite T.V. It is very hard to run any further cables down to my main T.V. entertainment center so I bought two of these units. I figured the Antenna input/output jack on the Diplexer would work with the Satellite Receivers T.V. RF output jack because they are the same frequency and type signal.
I connected a short cable coming from the Satellite dish to the Diplexer and mounted it in the attic. On the other side of the Diplexer I then connected the to the cable that originally ran to the dish from the receiver. I put a second diplexer on the other end of the cable to the Satellite Receiver for Direct T.V.
So basically you have one diplexer in the attic with a cable to the Dish and a cable to the wifes T.V.

Short list of connections:
Diplexer in Attic:
a. connect short cable from Dish to Satellite input
b. connect cable from secondary T.V. to Attenna input/output
c. connect original cable that went from Dish to Receiver into the jack on the opposite side of Diplexer

Diplexer in Entertainment Center.
a. Connect Original Cable that went from Dish to Receiver into the Side of the Diplexer with Single Satellite Jack.
b. Connect short cable from Satellite output of Diplexer to the Satellite Receiver Dish input.
C. connect a short cable from the Diplexer Antenna Input/Output to the RF T.V. signal output jack of the Satellite Receiver.

The signal is exceptional and you cannot see any noticable signal degragation. These are an exceptional product at a decent price.
  1     2